iOptron Pier Top Flange Plate - No Accessories
- This is a 6" iOptron Pier Top Flange Plate
- Build your own pier with this plate
- Modify your own existing pier or tripod
- Can be used to mount various iOptron mounts
- iOptron mounts require some accessories with this Plate
- See description below for accessories
This is a 6" (150 mm) iOptron Pier Top Flange Plate which is intended to be used for building your own pier or modifying your existing tripod or pier, which might not be from iOptron. Product is intended to support and attach various iOptron Mounts, when using the appropriate, specific accessories.
NOTE: This product is just the Top Flange Plate as shown in the photo and drawing for this item. This item does not include any accessories. If you already have the accessories then order this item. If you need accessories for attaching the specific iOptron mounts, then see the other products in this series, which include accessories which are needed for specific mounts.
The Pier Top can be used to mount the following mounts (with appropriate mounting accessories):
- CEM60/CEM70 (w/ center post)
- CEM40(w/ center post)*
- GEM45(w/ center post)*
- iEQ45/iEQ45 (w/ center post and alignment peg)
- iEQ30/iEQ30 Pro (w/ center post and alignment peg)*
- AZ Mount Pro/MiniTower/MiniTower II/MiniTower (w/ a center T-bolt)
* NOTE: Due to the small mount base of the mount, the low latitude operation may be affected.
|Function:||Top Flange Plate for pier mounted iOptron mounts|
|Plate diameter:||6" (150 mm)|
|Configuration 1:||Three (3) M10 threaded through holes for MT/MT2/MTP and AZ Mount Pro|
|Configuration 2:||Four (4) M8 threaded through holes for CEM60/CEM60-EC, or iEQ45/iEQ45 Pro|
|Configuration 3:||Four (4) M6 threaded through holes for CEM40/GEM45/iEQ30/iEQ30 Pro.|