Do you wish you had an easy way to move your tripod or pier mounted telescope from garage to patio or driveway? JMI Wheeley Bars (telescope wheels/dolly) were created for just that purpose. The sturdy base with locking wheels and leveling bolts allows you to easily move, lock, level and use the complete telescope assembly. And best of all, you don''t have to disconnect and reconnect all the electrical and computer cabling.

JMI Wheeley Bars are designed to be used on hard flat surfaces only. With the optional large-wheel upgrade, great care in maneuvering and ideal conditions, they can be used on grass, dirt and gravel surfaces. Wheeley Bars are generally designed to be used with the tripod legs almost fully retracted to reduce the overall width.

A Word of Warning: The heavier the telescope mounted on the Wheeley Bars, the more careful one must be in moving the complete system by pulling or pushing below the center of gravity. JMI is not responsible for incorrect loading or operation.

This set of JMI Wheeley Bars are designed to fit Meade LightBridge 8"; Orion SkyQuest XT8; Other Adaptable to Dobsonians with 19" Diameter Ground Board

Customized model with four large 10" all-terrain pneumatic wheels and a tow handle.

NOTE: The ground board feet may need to be moved.

-Raises mount 3" to 4" off the ground

-Wheel diameter is 10"

-Width (at rear wheels) is 27"

-Length (front to back including wheels) is 37"

• Designed to fit Meade LightBridge 8"; Orion SkyQuest XT8

   

   

• Other Adaptable to Dobsonians with 19" Diameter Ground Board

   

   

• Customized model with four large 10" all-terrain pneumatic wheels and a tow handle

   

   

• Easy transport your scope from place to place!

Equipment Type: Telescope Dolly

Height: Raises mount 3" to 4" off the ground

Wheel diameter: 10"

Width (at rear wheels): 27"

Length (front to back including wheels): 37"