JMI 10" Pneumatic Large Wheels for Universal-Style Wheeley Bars
Add six large 10" all-terrain pneumatic wheels and a tow handle to replace the standard 2-3/8" hard-rubber wheels on Universal-Style Wheeley Bars. A dual inboard wheel design on the rear wheels maintains a narrow profile. With these wheels, the Wheeley Bars will raise the mount approximately 3-1/4" off the ground.
If you wish to replace your 2-3/8" wheels with 10" wheels after the original purchase, use the "purchase separately" option (part number TPW10). You can only replace your small wheels with the large wheels if your current wheels are attached with bolts (current manufacturing method) rather than rivets (very old manufacturing method). With this "aftermarket" option, YOU will be removing the original wheels and installing the 10" wheels. (JMI will not accept returns of used small wheels.)
Is this an AFTERMARKET Upgrade (PURCHASED SEPARATELY) for PRE-OCTOBER 2013 Large or Heavy Duty Medium Wheeley Bars? If you are purchasing the Large 10" Pneumatic Wheel Upgrade for Large Size Universal Wheeley Bars or HEAVY DUTY Medium Size Universal Wheeley Bars purchased before October 2013, please let us know that you need the Long Mounting Bracket. Contact KhanScope about this matter at the time of purchase.
You can verify the need for the Long Mounting Bracket by measuring the Threaded Leveling Screw Guide (Long Nut) which holds the leveling screw (see picture below). Units built before October 2013 used a longer guide/nut which measures about 2-3/8" and requires the Long Mounting Bracket. Current guide/nut length (which does NOT require the longer bracket) is about 1-5/8".