1/3
photographic adaptors

SXV AutoGuider [SXV-H9]

Starlight Xpress   ——   SKU: SXV-H9
$438.00 CAD
Add to cart
Product Info
Features
Shipping

 

About the Starlight Xpress SXV AutoGuider...

This mini-cam autoguider (has the same chip as the old MX5) plugs into the back of the SXV cameras from Starlight Xpress -- for super simple setup! The rear panel of the Starlight Xpress SXV-H9 Autoguider provides multiple inputs and outputs, as shown. The autoguider output is opto-isolated and will drive any standard active-low guider input via an RJ11 ''telephone'' lead. The Parallel and serial socket is an 18 way latching high density connector, which provides both power and control signals for the external guide camera. It also carries two RS232 serial ports for external device control. If the serial ports are not required, the guide camera may be connected directly to this socket, otherwise a small ''port divider'' box can be connected in-line and presents the two serial outputs on standard 9 pin ''D'' plugs.

 

The Starlight Xpress SXV-H9 Autoguider guide camera and port divider box, with a 1.25" eyepiece for comparison. The guide camera uses a 4.9 x 3.7mm CCD (1/3" format) and will slide into a 1.25" focusing assembly. It may also be used with a ''CS'' mount camera lens. The weight is less than 100 grams.

 

 

Starlight Xpress SXV AutoGuider Features...

 

  • The Starlight Xpress SXV Autoguider output is opto-isolated and will drive any standard active-low guider input via an RJ11 ''telephone'' lead.

     

     

  • Parallel and serial socket is an 18 way latching high density connector, which provides both power and control signals for the external guide camera.

     

     

  • The Starlight Xpress SXV Autoguider uses a 4.9 x 3.7mm CCD (1/3" format) and will slide into a 1.25" focusing assembly. It may also be used with a ''CS'' mount camera lens.

     

     

  • May be connected directly to this socket, otherwise a small ''port divider'' box can be connected in-line and presents the two serial outputs on standard 9 pin ''D'' plugs.

     

     

  • This mini-cam autoguider (has the same chip as the old MX5) plugs into the back of the SXV cameras from Starlight Xpress -- for super simple setup!

 

 

Starlight Xpress SXV AutoGuider Specifications...

Equipment Type: Autoguider

Fits: 1.25"

Weight: 100 gm

Format: 4.9 x 3.7mm

Starlight Xpress Product Number: SXV-H9