About the Bob''s Knobs Meade 10" f/10 with 6-Screw Secondary...
Collimate your Schmidt Cassegrain Telescope or Newtonian Reflector Telescope without tools when you use Bob''s Knobs!
It'''s easy... just grab a Bob''s Knob Collimation Thumbscrew and turn. You can even do it while looking through the eyepiece on most scopes. And you''ll never drop that pesky little Allen wrench or screwdriver into the grass again. Installation is a snap with the included instructions, and you can undo the modification at any time.
Note: The factory dust cover will fit normally with Bob'''s Knobs installed.
See the FAQ and technical paper for additional information on installing Bob'''s Knobs on Meade telescopes with six factory secondary screws.
Pre-2005 Meade 10" telescopes have three screws on the secondary housing. The 3-screw secondary requires different knobs. Do not use knobs for the 6-screw secondary on the 3-screw secondary. The screws on the 6-screw knobs are too long.
An Allen wrench for removing the factory collimation screws is included with your order.
Bob''s Knobs Meade 10" f/10 with 6-Screw Secondary Features...
- Installation is a snap with the included instructions
- Modification can be undone at any time
- Knobs are crafted from black plastic, black oxide steel (black) and/or stainless steel (silver)
- No tools required to perform a collimation!
Bob''s Knobs Meade 10" f/10 with 6-Screw Secondary Specifications...
Equipment Type: Collimation Knobs
Fits: Meade 10" (25 cm) f/10 SCT versions with six screws on the secondary housing (LX90, LX200, LX200ACF, LX200R, others). The inner screws are for collimation.
Knobs: Black plastic, 16 mm (5/8") diameter
Threads: Black anodized aluminum alloyBob''s Knobs Product Number: M10-6