1/1
dew prevention

DigiFire 10 Temperature Sensing Dew Heater Controller [2001-10]

Kendrick   ——   SKU: 01/10/2001
$246.00 CAD
Add to cart
Product Info
Features
Shipping

 

About the Kendrick DigiFire 10 Temperature Sensing Dew Heater Controller...

Are you looking for a great dew heater controller to go with your system? Then check out the Kendrick DigiFire 10 Temperature Sensing Dew Heater Controller! It''s loaded with features you''ll apppreciate...

 

The Kendrick DigiFire 10 Temperature Sensing Dew Heater Controller is astrophotography friendly because it is 100% RF free. It has 2 outputs programmable for temperature sensing. Set these two outputs to keep your chosen optical surfaces anywhere from 1 degree to 10 degrees C above ambient temperature. (Only one optic sensor is included with the controller. Ambient air sensor in included). The remaining 2 programmable outputs can be programmed to operate on duty cycle. Or, use all 4 on duty cycle. All four outputs are programmable in duty cycle if you choose, from 0 to 100% in 10% increments.

 

Need more? The Kendrick DigiFire 10 Temperature Sensing Dew Heater Controller will also allow you to run 12 VDC accessories or heaters from the 2 dedicated 12 volt outputs. For example, run cooling fans, computerized setting circles, DewGuard secondary mirror heaters etc. Mosfet transistors built on board (no voltage drops!) and on all outputs/ Get the best possible performance out of your heaters!

 

 

Kendrick DigiFire 10 Temperature Sensing Dew Heater Controller Features...

 

  • 100% digital operation.

     

  • RFI (radio frequency interference) free. Absolutely necessary if you are into digital imaging!

    6 outputs.

     

  • 2 outputs programmable for temperature sensing. Set these two outputs to keep your chosen optical surfaces anywhere from 1 degree to 10 degrees C above ambient temperature. (Only one optic sensor is included with the controller. Ambient air sensor in included). The remaining 2 programmable outputs can be programmed to operate on duty cycle. Or, use all 4 on duty cycle.

     

  • All four outputs are programmable in duty cycle if you choose, from 0 to 100% in 10% increments.

     

  • Low voltage cut-off (a Kendrick standard!). Protect your battery from being to deeply discharged.

     

  • Run 12 VDC accessories or heaters from the 2 dedicated 12 volt outputs. For example, run cooling fans, computerized setting circles, DewGuard secondary mirror heaters etc.

     

  • Firmware upgradeable.

     

  • Pulse Width Modulation duty cycle control.

     

  • Reverse polarity protection.

     

  • Mosfet transistors built on board (no voltage drops!) and on all outputs! Get the best possible performance out of your heaters!

     

  • Brushed stainless steel case.

     

  • Really simple to use!

     

  • Dimensions: 5.5" L x 3" W x 1" H

     

  • 1 Year warranty, including sensors

     

  • Temperature sensors are calibrated in house by Kendrick.

     

  • Includes 1 ambient temperature sensor, 1 optic sensor and Velcro tab.

     

  • Temperature sensor cables made with cold flex cable (rated to -40 deg C).

 

 

Kendrick DigiFire 10 Temperature Sensing Dew Heater Controller Specifications...

Equipment Type: Dew Heater Controller

Style: Digital

# of Outputs: 6 - 2 dedicated 12 volt

# of Sensors: 1 ambient temperature sensor, 1 optic sensor

Case Construction: Brushed Stainless Steel

Dimensions: 5.5" L x 3" W x 1" H

Kendrick Product Number: 2001-10